Tuesday, June 28, 2016

Polk Audio MM1240DVC (MM-1240DVC) 850W 12" Mobile Monitor Subwoofer/Sub Woofer

$227.86


Polk Audio MM1240DVC (MM-1240DVC) 850W 12" Mobile Monitor Subwoofer/Sub Woofer  $227.86

12" Dual 4 ohm Mobile Monitor Series Subwoofer
Power Handling:
Peak: 850 watts
RMS: 425 watts
Impedance: Dual 4 Ohm
Polymer woofer cone
Butyl rubber surround
Carbon Composite Basket is very lightweight and will not flex during use
Marine Certified
Nickel plated heavy duty terminals can be used with speaker wire up to 8 gauge or two twisted pairs of 12 gauge
Klippel Distortion Analyzer results in the best possible performance at any listening level
2" High temperature copper voice coil
Frequency response: 27-200 Hz
Sensitivity: 88 dB

Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
ALPINE MRV-M500 AMP 1CHANNEL 1000W MAX SUBWOOFERS SPEAKERS BASS AMPLIFIER

$240


ALPINE MRV-M500 AMP 1CHANNEL 1000W MAX SUBWOOFERS SPEAKERS BASS AMPLIFIER  $240

Amplifier Type: Class-D (Digital)
    Channel Design: 1 Channel (Mono)
    Power Supply Design: DC-DC PWM Power Supply
    Power Supply: MOSFET
    Pre-Amp Stage: Discrete
    Final Outputs: Power MOSFET
    Crossover: Variable Lowpass Filter
    Gain Control: Continuously Adjustable Gain Control
    Bass EQ: Bass EQ Function
    Bass Control: Remote Bass Control (RUX-KNOB) Ready
    Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
    Low-impedance Possibility:
    Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
    Board Circuitry: S.T.A.R. Circuit
    RCA Output: Non-Fading Pre-Amp Output (4 Volts)
    Speaker-Level Inputs: 4-channel Speaker Level Inputs
    Power Indicator: Top Mounted Blue LED Power Indicator
    Thermal Control: Multi-stage Power Limits

Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
KINETIK KHC2400-REV 2400 WATT HIGH CURRENT CAR AUDIO POWER CELL

$307.99


KINETIK KHC2400-REV 2400 WATT HIGH CURRENT CAR AUDIO POWER CELL  $307.99

Kinetik HC2400-REV 12V High Current Terminal Car Audio Power Cell Battery
Sealed absorbed glass mat (AGM) design
Can be used as a replacement for your vehicles standard battery
Can also be used as an additional battery to power your high-performance sound system
Perfect for 2400W car audio stereo systems
Stores energy so you don't need a capacitor for your system
Leak-Proof, non-hazardous design
No external vents allow this battery to be mounted anywhere with no leaks
Fits in almost any factory battery location
Ultra low ESR
More plates for stronger energy density
Higher voltage under load
100% Sealed and maintenance free
Tightly packed cells
Resists extreme heat & vibrations for ultimate performance

Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
JL Audio JX360/4 360W 4 Channel Class AB JX Car Audio Amplifier

$249.95


JL Audio JX360/4 360W 4 Channel Class AB JX Car Audio Amplifier  $249.95

JL Audio JX360/4  360W 4 Channel Class AB JX Series Car Audio Amplifier
RMS Power Rating (14.4V):
4 ohms: 70 watts x 4 chan.
2 ohms: 90 watts x 4 chan.
Bridged, 4 ohms: 180 watts x 2 chan.
RMS Power Rating (12.5V):
4 ohms: 55 watts x 4 chan.
2 ohms: 80 watts x 4 chan.
Bridged, 4 ohms: 160 watts x 2 chan.
Unregulated PWM switching type power supply
LED power (green) and protect (red) indicators
Soft start turn-on prevent clicking and popping when system turns on
4/3/2 channel operation
Speaker-level (high-level) inputs with signal sensing for automatic turn-on
Preamp RCA outputs to daisy chain multiple amps
3-Way System Protection circuitry (thermal, low impedance, and speaker short protection)
Heavy duty aluminum alloy heatsink for effective heat dissipation
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Input sensitivity:
Low level: 200mV-4V
High level: 2.0V-10V
Variable low-pass filter (50-200 Hz, 12 dB/octave)
Damping factor: >60 @ 4 ohm
Frequency response: 20-20,000 Hz (+/– 1 dB)
Recommended Fuse Value (Type): 50A (MAXI or AGU)
Dimensions: 15-1/2"L x 7-3/4"W x 2-1/8"H
4-gauge power and ground wiring is required for installation.
Weight: 10 LBS

Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
POLK AUDIO MM651 6.5 400W MARINE BOAT CAR STEREO FULL RANGE SPEAKERS

$206.32


POLK AUDIO MM651 6.5 400W MARINE BOAT CAR STEREO FULL RANGE SPEAKERS  $206.32

Power Handling:
Peak: 400 watts per pair / 200 watts each
RMS: 200 watts per pair / 100 watts each
Woven glass composite cone woofer
Butyl rubber surround
1" Silk composite dome tweeter
2.7 ohms impedance (Is compatible with aftermarket head units)
Klippel distortion analyzer
1-1/4" Large diameter voice coil
Neodynium magnet structure
Carbon composite basket
Top-mount depth: 2-5/8"
Grille Included
frequency response: 40-25,000 Hz
sensitivity: 94 dB @ 1 V

Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
MEMPHIS 15-MOJO512D4 12" 2200W MAX DUAL 4-OHMS MOJO 5 SUBWOOFER BASS SPEAKER

$549.99


MEMPHIS 15-MOJO512D4 12" 2200W MAX DUAL 4-OHMS MOJO 5 SUBWOOFER BASS SPEAKER  $549.99

Size: 12”
RMS: 1100 watts
Peak: 2200 watts
Sensitivity: 81dB
Magnet Size: 196 oz
Mounting Depth: 8”  
Vented cast aluminum
4-layer copper wound voice coil
3" High temperature aluminum voice coil former
Dual 4 ohms
Fiberglass reinforced cone
Stitched rubber surround

Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
POLK AUDIO MM5251 5.25" 2-WAY MARINE BOAT CAR COMPONENT 400W MAX SPEAKERS

$306.83


POLK AUDIO MM5251 5.25" 2-WAY MARINE BOAT CAR COMPONENT 400W MAX SPEAKERS  $306.83

5-1/4" MM Series Marine Certified Component Speakers System
Power Handling:
Peak: 400 watts per set / 200 watts each side
RMS: 180 watts per set / 90 watts each side
Woven glass composite cone woofer
Butyl rubber surround for a smoother response
1" Silk/Polymer composite swivel tweeter
2-Way crossover with a 2-Position tweeter level
Klippel optimized components for distortion-free sound
2.7 ohms impedance
30mm Large diameter voice coil
Neodymium magnet structure for more power
Top-mount depth: 2-3/8"

Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)