Wednesday, May 21, 2014


JL AUDIO JX360-4 360W RMS, 4-CHANNEL CLASS AB JX SERIES FULL-RANGE CAR AMPLIFIER $178.88

JL AUDIO JX360-4 360W RMS, 4-CHANNEL CLASS AB JX SERIES FULL-RANGE CAR AMPLIFIER $178.88



JX Series 4-Channel Class A/B Car Amplifier
RMS Power Rating (@ 14.4V):4 ohms: 70 watts x 4 chan.
2 ohms: 90 watts x 4 chan.
Bridged, 4 ohms: 180 watts x 2 chan.
RMS Power Rating (@ 12.5V):4 ohms: 55 watts x 4 chan.
2 ohms: 80 watts x 4 chan.
Bridged, 4 ohms: 160 watts x 2 chan.
Unregulated PWM switching type power supply
LED power (green) and protect (red) indicators
Soft start turn-on prevent clicking and popping when system turns on
4/3/2 channel operation
Speaker-level (high-level) inputs with signal sensing for automatic turn-on
Preamp RCA outputs to daisy chain multiple amps
3-Way System Protection circuitry (thermal, low impedance, and speaker short protection)
Heavy duty aluminum alloy heatsink for effective heat dissipation
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Input sensitivity:Low level: 200mV-4V
High level: 2.0V-10V
Variable low-pass filter (50-200 Hz, 12 dB/octave)
Damping factor: >60 @ 4 ohm
Frequency response: 20-20,000 Hz (+/– 1 dB)
Recommended Fuse Value (Type): 50A (MAXI or AGU)
Dimensions: 15-1/2"L x 7-3/4"W x 2-1/8"H
4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.




Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

RE AUDIO XTX800.4 800W 4-CHANNEL FULL RANGE DIGITAL XTX SERIES CAR AMP $195

RE AUDIO XTX800.4 800W 4-CHANNEL FULL RANGE DIGITAL XTX SERIES CAR AMP $195



XTX Series 4-Channel Full Range Digital Car Amplifier
RMS Power Rating (14.4V):4 ohms: 60 watts x 4 chan.
2 ohms: 90 watts x 4 chan.
Bridged, 4 ohms: 180 watts x 2 chan.
Dynamic power output: 800 watts
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
4/3/2 channel operation
2-Way System Protection circuitry (thermal and short circuit)
Heavy duty brushed aluminum alloy convection cooled heatsink for efficient heat dissipation
Nickel-plated RCA level inputs
Nickel-plated 12AWG screw terminals
Input sensitivity:
Low level: 200mV-6V
Variable high-pass filter (50-300 Hz, 24 dB/octave)
Variable low-pass filter (50-300 Hz, 24 dB/octave)
Signal to noise ration: 90dB
Frequency response: 10-30,000 Hz
Dimensions: 5-15/16"L x 7-1/2"W x 1-15/16"H
4-gauge power and ground wiring is required for installation.


Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

ALPINE MRX-M240 2400W RMS MONOBLOCK X-POWER SERIES CLASS D CAR AMPLIFIER $495

ALPINE MRX-M240 2400W RMS MONOBLOCK X-POWER SERIES CLASS D CAR AMPLIFIER $495





ALPINE X-POWER SERIES MONO POWER DIGITAL AMPLIFIER - MRXM240

X-Power amplifiers use digital technology trickled-down from Alpine’s proven PDX amplifier architecture and are offered at a lower price point. The X-Power models have ultra clean sound output, with the highest damping factor, lowest distortion, highest bandwidth and best signal-to-noise in their class. Utilizing a small footprint that is the result of 80% total efficiency, they can be installed in many compact locations. Their internal monitoring system optimizes power output, to keep the music playing even under extreme heat and load conditions. 

Power Handling:
  • 1500W RMS x 1 @ 4 Ohms
  • 2400W RMS x 1 @ 2 Ohms
General Features:
  • CEA-2006 Amplifier Ratings: 1500W RMS x 1 [4 ohm @14.4V =1% THD + N]
  • 2400W RMS x 1 [2 ohm @ 14.4V = 1% THD + N]
  • S/N: 82dB (ref: 1W into 4 ohm)
  • Remote bass knob compatible (RUX-KNOB, sold separately)



    Sourcing - LA
    Text/Call (323-943-8207) (1-213-261-6329)
    http://sourcing-la.com

JL AUDIO XD600/6 600W RMS, 6-CHANNEL CLASS D XD SERIES CAR AMPLIFIER $378

JL AUDIO XD600/6 600W RMS, 6-CHANNEL CLASS D XD SERIES CAR AMPLIFIER $378





XD Series 6-Channel Class D Car Amplifier
RMS Power Rating (14.4V):

    4 ohms: 75 watts x 6 chan.
    2 ohms: 100 watts x 6 chan.
    Bridged, 8 ohms: 150 watts x 3 chan.
    Bridged, 4 ohms: 200 watts x 3 chan.

RMS Power Rating (12.5V):

    4 ohms: 60 watts x 6 chan.
    2 ohms: 90 watts x 6 chan.
    Bridged, 8 ohms: 120 watts x 3 chan.
    Bridged, 4 ohms: 180 watts x 3 chan.

Unregulated MOSFET switching type power supply
NexD Ultra-High Speed Class D topology
Wired JL Audio HD-RLC remote level control sold separately
LED power (green) and protect (red/yellow) indicators
Independent input sensitivity controls
State-of-the-art microelectronic components
6/5/4/3 channel operation
Advanced Thermal Rollback System completely eliminates annoying thermal shut-down events
Studio-grade signal processing with fully variable crossover filters
Extruded aluminum alloy system setting security cover
Total amplifier efficiencies exceeding 80%
Noise-killing, highly flexible differential-balanced inputs
Preamp RCA outputs to daisy chain multiple amps
3-Way System Protection circuitry (thermal, overload, and speaker short protection)
Heavy duty compact unitary cast alloy heat sink for extreme heat dissipation
Silver-plated RCA level inputs
Silver-plated screw terminals
Input sensitivity:

    Level: 100mV-4V

Variable high-pass filter (50-500 Hz, 12 dB/octave Butterworth)
Variable low-pass filter (50-500 Hz, 12 dB/octave Butterworth)
Damping factor: >150 @ 4 ohms per chan./ 50Hz
Frequency response: 12-22,000 Hz
Dimensions: 10-1/4"L x 7-1/16"W x 2-1/16"H
4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.




Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

RE AUDIO XTX-500.5 (XTX500.5) 1500W 5-CHANNEL XTX SERIES FULL RANGE DIGITAL CAR AMPLIFIER $199

RE AUDIO XTX-500.5 (XTX500.5) 1500W 5-CHANNEL XTX SERIES FULL RANGE DIGITAL CAR AMPLIFIER $199





 XTX Series 5-Channel Full Range Digital Car Amplifier
    RMS Power Rating (14.4V)):
        4 ohms: 60 watts x 4 chan. + 200 watts x 1 chan.
        2 ohms: 90 watts x 4 + 300 watts x 1 chan. chan.
        Bridged, 4 ohms: 180 watts x 2 chan. + 300 watts X 1 chan.
    Dynamic power output: 1500 watts
    Pulse Width Modulated MOSFET power supply
    LED power (green) and protect (red) indicators
    Wired remote included
    Fixed bass boost (12 dB at 45 Hz)
    5/3 channel operation
    2-Way System Protection circuitry (thermal and short circuit)
    Heavy duty brushed aluminum alloy convection cooled heatsink for efficient heat dissipation
    Nickel-plated RCA level inputs
    Nickel-plated 8-18AWG screw terminals
    Input sensitivity:
        Low level: 200mV-6V
    Variable high-pass filter (30-300 Hz, 24 dB/octave)
    Variable low-pass filter (50-1000 Hz, 24 dB/octave)
    Signal to noise ration: 90dB
    Phase Shift Control: 0 - 180°
    Frequency response: 10-30,000 Hz
    Dimensions: 10-5/8"L x 7-1/2"W x 1-15/16"H
    4-gauge power and ground wiring is required for installation.




Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

HIFONICS BRX1100.1D 1100W RMS CLASS NEXTGEN SUPER-D MONOBLOCK AMP $242.25

HIFONICS BRX1100.1D 1100W RMS CLASS NEXTGEN SUPER-D MONOBLOCK AMP $242.25




Brutus Series Monoblock Class NextGen Super-D Car Amplifier
 
 
RMS Power Rating (@ 14.4V):
4 ohms: 450 watts x 1 chan.
2 ohms: 800 watts x 1 chan.
1 ohm: 1100 watts x 1 chan.
Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality
Wired remote bass level control included
LED power (green) and protect (red) indicators
Variable Bass Boost (0 to +10 dB bass boost)
Built-in system diagnostics
Mono Channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
Lighted connectors and blue wash of light from the underside of the heatsink
Input sensitivity:
Variable low-pass filter (35-250 Hz)
Variable sub-sonic filter (15-35 Hz)
Frequency response: 10-250 Hz
CEA-2006 compliant amplifier
Dimensions: 14-3/8"L x 10-5/16"W x 2-1/2"H
4-gauge power and ground wiring is required for installation. 



Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

HIFONICS BRX1600.1D 1600W RMS CLASS SUPER-D MONOBLOCK CAR AMPLIFIER $268

HIFONICS BRX1600.1D 1600W RMS CLASS SUPER-D MONOBLOCK CAR AMPLIFIER $268





Brutus BRX Amps: Brutual to Competition
The Gods have struck again from Mt. Olympus. The famous Brutus amplifier has gone through a redesign and now features a new look along with extreme power output. The design for the new Brutus BRX amplifiers has a blue illuminated underglow that gives the amplifier a floating appearance when properly mounted. Molded and angled illuminated terminals add to the stylish design and also provide stress-free installation access. Accu-Cross crossovers allow for adjustments and sound shaping. The Ultra-Fi MOSFET power supplies ensure the amplifier can maximize its sound capabilities.
All single-channel monoblock amplifiers from the Brutus BRX amplifiers feature NGSD Next Generation Super-D Class. This NGSD digital chip design in the amplifiers has been tweaked to provide an extremely efficient, low temperature, high amplification system.
General Features:
Brutus Series Monoblock Class NextGen Super-D Car Amplifier
RMS Power Rating (@ 14.4V):
4 ohms: 600 watts x 1 chan.
2 ohms: 1200 watts x 1 chan.
1 ohm: 1600 watts x 1 chan.
Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality
Wired remote bass level control included
LED power (green) and protect (red) indicators
Variable Bass Boost (0 to +10 dB bass boost)
Built-in system diagnostics
Mono Channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
Lighted connectors and blue wash of light from the underside of the heatsink
Input sensitivity:
Variable low-pass filter (35-250 Hz)
Variable sub-sonic filter (15-35 Hz)
Frequency response: 10-250 Hz
CEA-2006 compliant amplifier
Dimensions: 15-15/16"L x 10-5/16"W x 2-1/2"H
2-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier




Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

HIFONICS BRX2000.1D 2000W RMS CLASS NEXTGEN SUPERD MONOBLOCK AMPLIFIER $285

HIFONICS BRX2000.1D 2000W RMS CLASS NEXTGEN SUPERD MONOBLOCK AMPLIFIER $285





Brutus BRX Amps: Brutual to Competition
The Gods have struck again from Mt. Olympus. The famous Brutus amplifier has gone through a redesign and now features a new look along with extreme power output. The design for the new Brutus BRX amplifiers has a blue illuminated underglow that gives the amplifier a floating appearance when properly mounted. Molded and angled illuminated terminals add to the stylish design and also provide stress-free installation access. Accu-Cross crossovers allow for adjustments and sound shaping. The Ultra-Fi MOSFET power supplies ensure the amplifier can maximize its sound capabilities.
All single-channel monoblock amplifiers from the Brutus BRX amplifiers feature NGSD Next Generation Super-D Class. This NGSD digital chip design in the amplifiers has been tweaked to provide an extremely efficient, low temperature, high amplification system.
 
General Features
Brutus Series Monoblock Class NextGen Super-D Car Amplifier
RMS Power Rating (@ 14.4V):
4 ohms: 700 watts x 1 chan.
2 ohms: 1400 watts x 1 chan.
1 ohm: 2000 watts x 1 chan.
Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality
Wired remote bass level control included
LED power (green) and protect (red) indicators
Variable Bass Boost (0 to +10 dB bass boost)
Built-in system diagnostics
Mono Channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
Lighted connectors and blue wash of light from the underside of the heatsink
Input sensitivity:
Variable low-pass filter (35-250 Hz)
Variable sub-sonic filter (15-35 Hz)
Frequency response: 10-250 Hz
CEA-2006 compliant amplifier
Dimensions: 16-11/16"L x 10-5/16"W x 2-1/2"H
1/0-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.




Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com