Sunday, May 18, 2014


ZAPCO ST1 400W 1 CHANNEL X SERIES CAR AUDIO AMPLIFIER $115

ZAPCO ST1 400W 1 CHANNEL X SERIES CAR AUDIO AMPLIFIER $115





 STUDIO X Series 400W Max Monoblock Car Amplifiers
        Mono, 4 ohms: 1 x 225 Watts @ 14.4V
        Mono, 2 ohms: 1 x 375 Watts @ 14.4V
    T.H.D. + Noise: <0.07% @ 4 ohms
    400 Watt total music power
    Channel separation >60dB
    THD .07%
    Damping factor >650 @ 4 ohms
    Frequency response 10-25kHz
    SN Ratio >87dB
    Input Gain control 
    Low level 185mV- 7V
    Battery Voltage Range of Operation 11V - 16V
    LED indicator Red/Green
    Protection (Short, Thermal, Over current) Yes
    Crossover and Subsonic filter LP
    Variable LP/ Subsonic 50hz-260hz/ 10hz-60hz
    Crossover Slope 12dB/ octave
    Dimensions mm/in
        Length 257mm / 10.25in
        Width 157mm / 6.25in
        Height 50mm / 1.95 in
    Quality ZAPCO construction




Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

ZAPCO C2K-2.5X.P 4-CHANNEL 300 WATTS CAR AMPLIFIER W DUAL CROSSOVER $499.95

ZAPCO C2K-2.5X.P 4-CHANNEL 300 WATTS CAR AMPLIFIER W DUAL CROSSOVER $499.95




Zapco C2K-2.5X.P 4-Channel 300 Watts Car Amplifier W/ Dual Crossover & Pass Through Output

Features:

    Competition Series 2/4-Channel Amplifier with Dual Crossover and Pass Through Output
    Rms Power Rating:
        Stereo, 4 ohms: 4 x 50 Watts
        Stereo, 2 ohms: 4 x 75 Watts
        Bridged, 2 ohms: 2 x 150 Watts
    T.H.D. + Noise: <0.009% @ 4 ohms.
    Chassis design allows infinite customization options by replacing slide-in trim panels to personalize any installation
    SymbiLink Balanced Technology provides up to 16 volts of balanced input for the cleanest, quietest signal possible
    Pre-clip and output clip indicators to maximize performance settings
    Symmetrical, discrete power amplifier circuitry
    Fuse, short circuit, high temperature, DC offset, and over voltage protection
    Dual color LED for power and protection indications
    25-amp High Current Bi-Polar output devices
    50-amp MOSFET switching devices
    Optically isolated power supply
    Gate Drive Boost maximizes power supply efficiency and improves overall performance
    Very high damping for excellent speaker control
    Surface Mount Technology w/1% resistors, precision capacitors, and massive ground planes
    Four layer PC board with heavy 2 oz copper
    Dual variable electronic crossovers
     Pass-through output
    Sub-sonic filter for speaker protection
    Switch for use as stereo, single L ch. or R ch. bridge
    L+R sum mono switch for use as a bass amp
    Dual cooling fans allow any mounting position
    Quality ZAPCO construction




Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

ALPINE PDX-5M 5-CHANNEL CLASS-D MARINE DIGITAL PDX AMPLIFIER $470

ALPINE PDX-5M 5-CHANNEL CLASS-D MARINE DIGITAL PDX AMPLIFIER $470



PDX Series 5-Channel Class D Marine Boat Amplifier

RMS Power Rating:
4 ohms: 75 watts x 4 chan. + 300 watts x 1 chan.
2 ohms: 75 watts x 4 chan. + 300 watts x 1 chan.
Bridged, 4 ohms: 150 watts x 2 chan. + 300 watts x 1 chan.
DC-DC PWM power supply
Direct FET Power
STAR Circuitry
Salt/fog resistant (ASTM B117)
UV weathering protection (ASTM G154/D4329)
LED power and protection indicators
Stackable operation allows for multi-amplifier setup
5/3 Channel operation
Soft turn-on circuitry
Continuously adjustable gain control
Thermal management control
Protection against over-current, over-voltage and thermal protection
Discrete pre-amp stage
Dual sided glass epoxy PC board
Heavy duty aluminum alloy heatsink
Variable high-pass filter (30-400 Hz, 12 dB/octave)
Variable low-pass filter (50-200 Hz, 12 dB/octave)
CEA-2006 compliant amplifier
Frequency response: 20-20,000 Hz
Dimensions: 10-1/8"L x 7-9/16"W x 2-7/16"H
4-gauge power and ground wiring is required for installation




Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

ALPINE PDX-V9 5-CHANNEL100 WATTS RMS X 4 + 500 WATTS RMS X 1 AMPLIFIER $422

ALPINE PDX-V9 5-CHANNEL100 WATTS RMS X 4 + 500 WATTS RMS X 1 AMPLIFIER $422





5-channel car amplifier
100 watts RMS x 4 + 500 watts RMS x 1 at 2 or 4 ohms
CEA-2006 compliant
stackable installation design with front-panel controls
variable high-pass filter on front channels (30-6000 Hz, 12 dB/oct)
variable high-pass filter on rear channels (30-600 Hz, 12 dB/octave)
variable low-pass filter on subwoofer channel (50-600 Hz, 24 dB/oct)
variable subsonic filter on subwoofer channel (0-30 Hz, 24 dB/oct)
quick-connect speaker connectors
Class-D amplifier design
MOSFET power and output stages
fuse rating: 40A x 2
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
10-3/16"W x 2-1/2"H x 8-3/8"D




Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

AUDIOBAHN A4002M $125

AUDIOBAHN A4002M $125





2 Ohm 2-Channel
Class A/B Mosfet Circuitry
Volt Meter



Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com

AUDIOBAHN A6004M $145

AUDIOBAHN A6004M $145





Number Of Channels: 4
Maximum Power: 1760 Watts
Built In Crossovers: Yes
Channel Separation: Yes
Amplifier Class: A/B

Features

Power Handling:

100W RMS x 4 @ 4 ohm
200W RMS x 4 @ 2 ohm
400W RMS x 2 @ 4 ohm
1760W MAX Power 

General Features:

Volt Meter
MOSFET Circuitry



Sourcing - LA
Text/Call (323-943-8207) (1-213-261-6329)
http://sourcing-la.com