Wednesday, February 13, 2013

13 inch Subs

13 inch Subs
I can sell my Items Everywhere please email or Call me the Item you like and ill put it on my Ebay or Send you and Invoice through paypal once you paid by paypal i will ship your item ASAP.
Thank you hope to hear from you.
JL Audio CP113G-W1v2 Slot-Ported JL Audio PowerWedge Enclosure Loaded with a Single 13W1v2-4 $268
JL Audio's PowerWedge enclosed subwoofer systems deliver thunderous bass without needing a lot of power. Each enclosure is designed from the ground up to get optimum performance from its drivers, so you get much more than just a box with a speaker inside.

JL Audio uses state-of-the-art automated woodworking equipment to fabricate high-quality MDF enclosures with rugged automotive carpeting, steel-mesh grilles, 5-way binding posts, and solid internal wiring. The enclosures are finished and inspected by hand at the manufacturing facility in Florida to ensure that you get the bass that you expect from JL Audio.

The CP113G-W1v2 Ported PowerWedge handles up to 350 watts RMS, housing one 13.5" W1v2 subwoofer that pounds out tremendous low end. The flared slot-port design maximizes efficiency for exceptional output, while minimizing turbulence for low distortion. You'll enjoy thick low-frequency response from all of your music with this capable enclosure in your trunk or cargo area.


ported hatchback-style enclosure with one 13.5" W1v2 subwoofer
5/8" medium density fiberboard construction covered with gray carpet
steel-mesh grille
4-ohm total impedance
    power handling: 350 watts RMS
    power handling: 700 watts peak power
frequency response: 20-200 Hz
sensitivity: 88 dB
30-1/4"W x 16-3/4"H x 16-1/2"D
PowerAcoustik THIN-13BX 13 700W Max, Single 4 ohm Subwoofer  $135
  13" Single 4 Ohms Shallow-Mount Subwoofer preloaded in a Compact Enclosure
Power Handling:
Peak: 700 watts
RMS: 350 watts
Polypropylene cone woofer
Semi-circular basket venting
Proprietary cast aluminum basket
12 Gauge direct wire terminal
2" Voice coil
Aluminum voice coil former
2" Mounting depth
Sensitivity: 79 dB
Loaded in a shallow sealed box
Designed specifically for truck style installations
Carpeted gray with black logos
Made from 3/4" MDF construction
Box volume: 0.6 cubic feet
Dimensions: 2-1/2"TD x 5"BD x 30"W x 14-1/2"H

Soundstream Stealth-13BX Low Profile Enclosure Loaded with a Single 13 Stealth-13 Subwoofer  $195
Soundstream STEALTH-13BX 13" Stealth Series Shallow Mount Loaded Subwoofer Enclosure
    Power Handling:
    Peak: 400 watts
RMS: 200 watts
Single 4 ohm voice coil
Solid aluminum cone woofer
Proprietary cast aluminum basket
Semi-circular basket venting
Fully shielded, inverted motor assembly
High temp ABS trim ring
Perforated rear chassis
5" High-temperature voice coil
EIMAL Anodized aluminum voice coil former
Nomex material spider
Sensitivity: 81 dB
Great for sealed enclosures
Single 13" Sealed Angled Enclosure
3/4 MDF construction
Spring post terminals
Sealed enclosure produces tight bass
Designed and engineered specifically for the loaded subwoofer
Complete with high-density black box carpeting
Embroidered Soundstream Spider logo
Dimensions: 2-7/16"(Top), 5"(Bottom)D x 30"W x 14-1/2"H

12 inch Subs

12 inch Subs
I can sell my Items Everywhere please email or Call me the Item you like and ill put it on my Ebay or Send you and Invoice through paypal once you paid by paypal i will ship your item ASAP.
Thank you hope to hear from you.
Audiobahn ABB121J Single 12 Slot Ported Loaded Subwoofer Enclosure  $145
Audiobahn ABB121J Single 12" Slot Ported Loaded Subwoofer Enclosure
Power Handling
RMS: 400 watts
Carbon composite cone with with laminated pulp reinforcement for more aggressive operation
Rubber surround for enhanced excursion
High quality MDF construction
Black carpeted covering
Extended low frequency for deep bass
Flared slotted ports allows for a lower tuning frequency
Bumped back plate
Extended & vented pole piece
Gold binding post terminals for corrosion resistance
45 oz Strontium magnet
2” 4 Layer voice coil
Frequency Response: 25-1000 Hz
Sensitivity: 94.5 dB
Impedance: 4 ohm
Dimensions: 9-7/8”D x 20-1/8”W x 16-1/8”H

Boss Audio S122AP Enclosure Loaded with Single 12 2000W Subwoofer - 2000W Monoblock Amplifier  $250
Boss Audio S122AP Enclosure Loaded with Single 12" 2000W Subwoofer - 2000W Monoblock Amplifier and Installation Kit Included

Power Handling

2000W Peak
1000W RMS
General Features

Boss Audio KIT-2 amplifier installation kit
Built-in MOSFET power amplifier
12-inch subwoofer
Frequency response: 40-200Hz
Impedance: 4 ohms
Sensitivity: 92dB
Subwoofers are usually sold as a single unit unless otherwise noted.
Authorized Internet Dealer

Cadence XWB12F Single 12” 700 Watt Slot Ported Passive Enclosure  $178
• RMS Power: 360 Watts
• PEAK Power: 700 Watts
• Frequency Response: 35Hz – 500Hz
• Sound Pressure Level: 90dB @ 1w/1m
• Impedance: 4 Ohm
• Dimensions (W x D x H): 22” x 16” x 16”
• Acrylic Injection Molded Woofer Cone
• Chrome Bar Xenith Design Woofer Grill
• Aviation Grade Blue/Black Tweet Carpet with Embroidered Cadence Logo

FLI Audio FU12A 1000W, Single 12 Sealed Subwoofer Amplified Enclosure  $110
FLI Underground FU12A 1000W, Single 12" Sealed Subwoofer Amplified Enclosure Loaded w/ FU12 Subwoofer

Amplified, Loaded Enclosure

*Complete 12" Amplified Loaded Enclosure Subwoofer Solution
*Includes a 12" FLI Audio Underground subwoofer and integrated amplifier
*Enclosure custom built for the loaded subwoofer
*Amplifier optimized to match the power handling of the subwoofer
*Extruded aluminum heatsink for improved thermal performance
*MOSFET Technology
*RCA Low level inputs
*High level speaker level inputs with included adapter
*Variable bass boost (0-6 dB)
*Thermal, short circuit, reverse polarity, and protection circuitry
*High density MDF construction box
*Double compact wedge bass enclosure design
*Enclosure design eliminates unwanted resonance improves sound quality
*Acoustic suspension bass enclosure design ensures tight accurate bass
*Spring loaded speaker terminals allow for the use of heavy gauge speaker cable
*Dimensions: 16"D x 14-1/8"W x 13-5/8"H

Subwoofer Features:

*12" Single 4 ohm FU Series Subwoofer
Power Handling:
    Peak: 1000 watts
    RMS: 300 watts
    Min Input: 150 watts
*Impedance: 4 ohm
*Electroplated Injection Molded Polypropylene (IMPP) Cone
*Butyl rubber surround for improved low frequency response
*Spring loaded nickel plated terminals
*Rubber gasket provides an airtight seal
*Multi layer voice coil with black aluminum former
*Frequency response: 25-1,500 Hz
*Sensitivity: 86 dB

Infinity Reference 1220SE 12 1200 Watts Enclosed Car Audio Subwoofer  $245
Single 12" Preloaded Enclosure with Slipstream Port and a 12" Reference Subwoofer
Power Handling:
300 watts RMS
1200 watts Max
Polypropylene Woofer Cone
Sensitivity: 94dB
Frequency Response: 33Hz - 300Hz
Impedance: 4 ohms

JBL GT5-1202BR Single 12 GT Series Bass-Reflex Subwoofer Enclosure  $195
12" Single GT Series Subwoofer
Power Handling:
Peak: 1100 watts
RMS: 275 watts
Final Impedance: 2 ohms
Polypropylene cone woofer
Rubber surround
Rubber coated tinsel leads
Vented motor structure
Dual-stacked, oversized magnets
Sensitivity: 90 dB

Enclosure Specifications:

JBL Tuned Slipstream Ported Enclosure
Designed specifically for the JBL GT5-12 subwoofer
Tuned to an optimal 45-150 frequency response
Recommended power handling: 100-275 watts RMS
Wired internally for a final impedance of 2 ohms
Covered in black carpet for looks and durability
Sturdy grill protects the subwoofer from unnecessary damage
Gold plated terminals or excellent connectivity
Banana clip ready
Made from durable 3/4" MDF (Medium Density Fiberboard
Dimensions: 10-15/16"D1 x 14"D2 x 22-5/8"W x 14-9/16"H

JBL PB1220 12 Loaded Enclosure With Slipstream Port  $395
12" Power Series subwoofer
Impedance 2 ohms
Power Handling:
Peak: 1600 watts
RMS: 400 watts
Subwoofer material: Kevlar Reinforced Paper
Woofer surround type: Butyl Rubber
Oversized, stacked magnets to increase magnetic flux
Built-in electronic crossover networks
Frequency response: 32Hz – 200Hz
Sensitivity: 90db
Enclosure Specifications:

12" Single Ported Subwoofer Enclosure
Round Slipstream port
Finish Material: Carpet and plastic
Dimensions: 19-5/16"D x 16-11/16"W x 22-11/16"H

JL Audio CS112-Wxv2 Subwoofer System with Single 12WXv2-4 Subwoofer  $170
Power Handling:
RMS: 200 Watts
Impedance: 4 ohms
Proprietary dynamic motor analysis (DMA) improves motor behavior
Elevated frame cooling delivers cold air above the top plate to the voice coil
Resists breakdown under extreme conditions
Integrated foam rear gasket which provides an optimal seal
Polypropylene cone material
Foam surround type
Frequency response: 22-250Hz
Sensitivity: 87.17dB

General Enclosure Features:

Sealed Subwoofer Enclosure
Subwoofer mounting depth: 5-5/16"
Subwoofer cutout diameter: 11-1/16"
Dimensions: 19-1/2"W x 15-1/4"H x 11-3/4"D

Kicker 10TCVT124 12 800 watts Single 4 Ohm Comp VT Series Truck Box Loaded Subwoofer (TCVT124)  $200
Kicker 10TCVT124 Single 4 Ohm 12" Comp VT Loaded Subwoofer Truck Enclosure Box
Shallow mount subwoofer allows for deep bass with minimum mounting depth
    Power Handling:
    Peak: 800 watts
    RMS: 400 watts
Impedance: Single 4 Ohm
Injection molded SoloKon cone
Ribbed Santoprene surround
Stitched surround for enhanced cone-to-surround strength
Extra strong adhesive and stitching prevents the cone from detaching from the surround
Spiralead tinsel lead technology weaves the tinsel leads into the spider
Super rigid cone and 360-degree back bracing eliminate distortion
Sturdy steel basket holds the subwoofer mounted firmly
Steel basket features perimeter venting around the single voice coil
Strong spring-loaded terminals
Newly re-designed 2010 basket structure
Includes a built-in steel clearance adapter plate, which replaces part of the enclosure wall to allow shallower installations
Shallow mount subwoofer allows for deep bass with minimum mounting depth
Ventless pole piece for extreme power handling
Shallow four-layer voice coil
High-Temperature voice coil
Powerful rear magnet
Frequency response: 25-350 Hz
Dimensions: 21-13/16"W x 13-7/16"H x 3-7/8"D(Top) x 6-15/16"D(Bottom)

Lanzar VCHB112 12 Dual 4Ohm Vector Series Loaded Subwoofer Ensolusure  $80
Lanzar VCHB112 Vector 1200 Watt Single 12' Slim Designed Bass Box Enclosure
12' High Power 4 OHM Subwoofer
Silver PP Cone With Rubber Edge
2.0' Aluminum Voice Coil
Rear Vented Design
1200 Watts MAX Power Handling
Dimension: 20.8'W x 15'H x 12'D

MTX Audio TNP112D Single 12 Loaded and Amplified Enclosed Subwoofer System $195
TNE112D Single Loaded Subwoofer Enclosure Features:

MTX TNP112D Sinlge 12" Terminator Series Subwoofer
Power Handling:
Peak: 600 watts
RMS: 200 watts
Single 4 ohms
2" Aluminum voice coil
Rubber Surround
Polypropylene Cone
MTX Audio Logo on Dustcap
48oz. Magnet
Frequency response: 37-150 Hz
MTX TNP112D Single 12" Vented Sub Enclosure
5/8" MDF Solid Construction
Durable Black Carpeting
Dimensions: 15-3/4"H x 21-1/4"W x 17-1/4"D

TNA201 Monoblock Amplifier Features:

MTX TNP112D Terminator Series Class D Monoblock Car Amplifier
RMS Power Rating:
4 ohms: 120 watts x 1 chan.
2 ohms: 200 watts x 1 chan.
Max power output: 400 watts x 1 chan.
LED power and protection indicators
Variable bass boost (0-18 dB at 40 Hz)
Mono gain control
Smart engage auto turn-on circuitry
Variable low-pass filter (50-250 Hz, 18 dB/octave)
Variable high-pass filter (50-250 Hz, 18 dB/octave)
CEA-2006 compliant amplifier
Dimensions: 11-3/4"L x 10-1/2"W x 2"H
8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.

Pioneer TS-SWX310 Shallow Series Preloaded 12 Sub Enclosure with 1 TS-SW301 Subwoofer  $145
12" Shallow Series Subwoofer
Power Handling:
Peak: 1000 watts
RMS: 250 watts
Injection molded polypropylene cone woofer
3-Layer woven radial urethane rubber surround
Air suspension system: allows harmonious movement of the drive cone and the main cone for a spiderless design and cleaner sound
Angled push terminals for greater versatility and easier installtion
55oz. Magnet structure
Frequency response: 20-114 Hz
Sensitivity: 91 dB


Compact wedge-shaped design
Medium density fiberboard (MDF) construction
Embroidered Pioneer logo
Black heavy-duty carpet finish
Angled push-terminals
Dimensions: 8.4"D x 32.4"W x 16.8"H

PowerAcoustik THIN-12BX 650W MAX, 12 Single 4 ohm Subwoofer Enclosure  $140

Subwoofer Features:

12" Specifically designed subwoofer
Power Handling:
Peak: 650 watts
Injection polymer woofer cone for increased strength
Natural butyl rubber surround for increased excursion capabilities
Acrylonitrile butadiene styrene high temperature injection basket
2" Voice coil with kapton former
Vent cooling motor structure design for increased heat dispersion and improved power handling
Mounting Depth: 3"

Enclosure Features:

12" Non-Amplified Plug-N-Play Loaded Enclosure
Sealed 3/4" MDF constructed enclosure for quick and responsive bass reproduction
Super Slim design making it easy to fit in any location
4 ohm system impedance
Black carpeted with embroidered accents
Nickel-plated spring-loaded speaker terminal cup
Dimensions: 3"TD x 5"BD x 30"W x 14-3/4"H

Rockford Fosgate R2S-1X12 Prime Series Single Loaded Enclosure $130
Subwoofer Features:

12" Dual 4 ohm Shallow Mount Prime Stage 2 Series Car Subwoofer
Power Handling:
Peak: 500 watts
RMS: 250 watts
Final Impedance: 2 ohms
Mica Injected Polypropylene Cone
Foam surround
StampCast basket with integrated spider venting
Linear spider with 16 AWG woven tinsel leads
2" Voice coil
CEA-2031 Compliant accurate power handling rating
Frequency response: 43-250 Hz
Sensitivity: 81 dB

Enclosure Features:

Single 12" Loaded Sealed Box
Solid 5/8" MDF Construction
Spring post terminals
Complete with high-density black box carpeting
Dimensions: 5-1/4"BD x 3-3/8"TD x 27-1/4"W x 13-1/2"H

Soundstream PW-12TBX 12 Preloaded Enclosure  $175
These aggressive new subs are engineered from the ground up. The new motors yield more power handling than the previous drivers and are specific per size. Past experience proves that one-size-fits-all motors for 10”-15” subs does not yield top performance. The drivers feature polypropylene cones and NBR rubber surrounds for durability.

Power Handling:

180W RMS

General Features:

Efficiency (1w/1m dB) 84.20
Voice Coil Configuration 1.5" Dual 2 Ohm
Mounting Depth 2.875"
Optimum Sealed ft3 0.90
PW-12tBX Preloaded Enclosure
Pre-loaded Enclosure w/ PW-12T Subwoofer
4 Ohm Impedance
Carpeted Black w/ Embroidered Accents